Reply to thread

Message: [QUOTE="The-Fett, post: 1348874, member: 14159"] Truck 2011 f250 d*****d and h&s So today I changed the fuel filters on the truck. After priming the filters and checking connections I went for a test drive. On "street" from 50-75 ipw went from 1224 to 1024 and rail pressure was 30.1 to 28.7 holding 24 psi On "performance" from 50-75 ipw went from 1443 to 1331 & rail pressure was 24.5 to 26.3 holding 25 psi So the question is is this normal or not? both times this was done was passing under full throttle. I have always understood that under full throttle I should be holding 28.0 or better on rail pressure. I see that the ipw is within the norm of where it usually is but it bothers me. Also street under full throttle was clean with very little haze. Performance was still a fair amount of soot not horrible but noticeable. Am I over thinking this or are there problems? Sent from my SM-N920V using Tapatalk [/QUOTE]

Verification

Random media

stevie

169856_1660980479165_1076760051_1781955_2591142_o

FullSizeRender_2_

0208151604

P1060064

1997 ZF5 DRW

x_dyno

IMAG0133_1_

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

Patrick Feeley

Total: 634 (members: 2, guests: 632)

Top