Reply to thread

Message: [QUOTE="superpsd, post: 1294870, member: 15821"] Many ways it can be saved. How long was water in the engine. I would put it on a stand, remove glow plugs and rotate motor upside down. Use compressed air and or vac to make sure water is gone. Rust will be next issue but there are many ways to remove the rust without removing the head. I have never had to remove cylinder wall rust with heads on but I may try to pour a rust removing product like Metal Rescue (good stuff also environmentally friendly) down the glow plug holes and let sit then drain. Also of course pull intake covers and inspect clean valves and ports. Last I would pour a little motor oil down each glow plug hole and bar motor over to lubricate cylinder walls. [/QUOTE]

Verification

Random media

2006 F350 XLT

67CatchCan

buddies

interior

tow_truck_3

stock_wheels_sale_1

Power for stereo system

IMAG0557

eleanor_part_two_48_

1b555080

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Patrick Feeley

Total: 342 (members: 1, guests: 341)

Top