Reply to thread

Message: [QUOTE="TARM, post: 69265, member: 578"] Since its under warranty I guess there is no reason to take the regulator apart. If that would be what I would do to see whats going on in there. IT sure seems like the regulator would have to be it. The only other thing would be the pump but the reg is more likely. Now I am assuming your gauge is good. Are you sure it is? I had one recently that I felt was reading low as I had to really crank the reg closed to much for the flow of the pump I was using. I started putting some pressure on the gauge and tapping it. The pressure bounced all over the place. Ended up I was about 20 psi higher than it showed. Just rule it out. Maybe you can borrow a gauge. A 100 psi oil pressure gauge will work as well as a fuel one if someone you know has one. you can pick them up cheap too for a china brand. [/QUOTE]

Verification

Random media

PB230071

My dually

11-8-2014

front_axle_swap8

elbow_2

eleanor_part_two_69_

sept_29_10_172

heavybag

MPD_Kit

Latest posts

S
4r100 P0715/P0717 trouble codes.
- Latest: smokeybear73
- Yesterday at 8:05 PM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Yesterday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

Total: 632 (members: 2, guests: 630)

Top