Reply to thread

Message: [QUOTE="golfer, post: 608198, member: 266"] ok. The injectors came back here...not once..not twice..but threeeeeeeeee times for being improperly installed...the external BODY of the injector(s) (not all but more than one each time)...was burned from the injectors not being seated into the cylinder heads properly and the copper crush washer NOT being crushed. there is not one other thing in or on the injector that can allow for carbon to be up past the copper washer on the nozzle...other than 100% mis-installation...every.single.time. they came back carboned up on the bodies. my PM was not smart in any way...seriously. very happy you were able to have them repaired. but once you take our injectors to another inj shop, have them disassembled..not just tested...but DISASSEMBLED ... you [I]own[/I] them, and we can't be responsible for a single thing past that point. believe me...I was very very frustrated with your situation, not at you...but with why the eff your 'mechanic' could not figure out how to bolt an injector down...over...and over...etc.... glad you are up and running... [/QUOTE]

Verification

Random media

4-26-11_017

00f0f_3TLaevZjzYh_600x450

2008 King Ranch motor work

241

97psd2

08 rear door panel

Latest posts

G
7.3L fuel pressure with black spring
- Latest: gooseman80
- Today at 1:41 PM
7.3 Tech
PCM replace/repair/compatibility
- Latest: KBMKVIII
- Yesterday at 2:33 PM
94-97 Aftermarket
G
97 Powerstroke PCM not capturing DTCs
- Latest: GRN250
- Monday at 9:13 PM
94-97 Tech
S
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: Smokin 6.0
- Monday at 9:29 AM
6.7 Tech & FAQ
S
Wiring diagrams ?
- Latest: Smokin 6.0
- Sunday at 8:42 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 467 (members: 0, guests: 467)

Top