Reply to thread

Message: [QUOTE="RoadRash, post: 755303, member: 1681"] Hello everyone, I've been doing a lot of research frantically trying to figure whats going on with my pride and joy. My truck is a late 99 F250 7.3 with around 180,000. It has always run like a champ until yesterday when I pulled into a parking lot. It was idling real rough and sounded like it had a knock almost. I tried to rev it up put it will not accelerate. I have a little bit of blue smoke coming out the exhaust. So today after searching I thought it could of been the UVCH. So i pulled both valve covers and both connectors where fine, also looked at the pins and all appear okay. I also started the truck and saw each injector was squarting out equal amounts of oil. Then it died... I also checked the 42 pin connector, as well as the UVCH connector my readings appear good as well Pass Driver 1= 3.4 8= 3.5 7= 3.1 2= 3.4 3= 3.1 4= 3.4 5= 3.5 6= 3.4 I also stay on top of oil changes with Shaffers. I also drained the fuel bowl and it had pressure, going to the store now to change the filter. I am truly stumped and about to run into traffic if I can't get my truck running again. Any ideas? I truly appreciate all the help I can get. [/QUOTE]

Verification

Random media

Chilling

2012-01-13_16-12-24_541

corbin1

Swamps Timing 1

247049_1985944375891_2003260_n

20171227_153050

05 ccsb 250 king ranch

Link Design

2012-08-03_12-39-07_231

SprintPhoto_dcprys

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 527 (members: 0, guests: 527)

Top