Reply to thread

Message: [QUOTE="Jbird, post: 1388469, member: 16164"] Well i got it all together and i seem to have kind of a grinding/rubbing noise. I noticed it looked like my caliper was locked up and rubbing the rotor. Pulled the caliper apart had new brake pads already sitting around so swapped them made sure the pins were sliding free and re assemble. Still getting the noise. Ive got a rotor on the way to try but im worried that it has to do with the hub. I noticed when i was installing the hub amd sitting the bearings that the end of the hub where the seal is doesnt meet against the other little seal that is on the axle at the end of the smooth machined surface. Im wondering if something is causing my bearings to tighten up to soon and holding my hub off which would keep my rotor farther out then it should be causing the pads to rub harder? I noticed another noise that worries me. When i stop hard now it has that "bad u-joints squeak" to it. Im just worried i dont have it right and i could be looking at ruining another set of bearings and possibly an axle and differential. And insight would be great Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

IMG_20110715_180532

2013-02-12_14-58-10_487

Dashdaq custom mount by Ricky

Trucksetup

Six.4

rear_axle

20979996117_ORIG

White truck

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 340 (members: 1, guests: 339)

Top