Reply to thread

Message: [QUOTE="Pjmobb, post: 1542161, member: 32254"] This is my first post on here so bare with me. 2008 6.4 bought from a dude in Wisconsin that took me pretty good. Found oversized OD bearings for the crank so we can line bore the block. I want to put delipped ceramic coated pistons max force 7. The pistons that were in it stick up .034 above the deck and the machine shop is putting two sleeves in so it will. Need to be decked. I can get pistons milled. What is the max the piston can come out of the block. All I could find was around .034 was the max. Using the same rods. The cam I am unsure if a stage one or stage two is best for me and I can not find dyno specs on them. The truck will be used for towing around 15000-18000lbs 1ton dually. I am having new guides put in the stock heads and valves reground. Egr gone. 4" exhaust. Minimax tunerI Any specs. You might have or experience with different parts would be great. Thanks in advance. [/QUOTE]

Verification

Random media

35751454218_363271103_IM1_02_565x421_A_562x421

IMG_20130426_101656_106

6.4 Single Turbo

20180115_080954

F2501

key_west

he351ve

SprintPhoto_bcprys

eleanor_part_two_48_

IMG_20130216_201617

919123_367663446688562_990954678_o

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 800 (members: 0, guests: 800)

Top