Reply to thread

Message: [QUOTE="Arconalloy, post: 1327329, member: 16420"] There is a small square on the bottom between the emblem and bezel I used a tiny flat head in the small slot and popped the bottom of the emblem up from the bezel then got my finger nails under it on each side and lifted off evenly. It's nothing but two plastic tabs that hold the emblem to the bezel then two hex head screws holding the bezel to the tailgate. The camera has a connector you can unplug and then just remove the screw holding the camera in the bezel once off the truck Just make sure you pull the emblem off as evenly as possible or those plastic clips will break [/QUOTE]

Verification

Random media

20121111_1801061

P1000854

2012-03-06_13-06-39_891

The other side of my soon to be towing beast.

Resampled952011-11-059517-05-5395567

6_0_e

MPD 6.7 Ford Budget Kit box 1

IMAG0030

IMAG1140

Lookin good

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Today at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

Total: 192 (members: 2, guests: 190)

Top