Reply to thread

Message: [QUOTE="dsberman94, post: 1322302, member: 12667"] I used the duplicolor in Arizona beige on my fender flares. 2 coats of adhesion promoter then a light coat of color and two heavy coats. Two more heavy coats around the area that will be hit by rocks and blended that coat into the rest of the flare. Then a couple heavy coats of clear. I used about 4-5 cans of color and 3-4 cans of clear total on just 4 flares. I didn't want them to chip and look like crap after 1 winter. In my case it almost seems a little lighter than the actual color on the doors and bed. Might be because I painted them laying down on sawhorses, I've heard you should paint stuff the way it will be on the vehicle for it to match perfect, also it could be because I layered the color on so thick over the whole flare. Not sure but idc. It's better than having black flares on a white and tan truck. [/QUOTE]

Verification

Random media

428040_3288692304964_1497394897_33116534_1302864293_n

My 6.0 excursion

user123603_pic33586_1373077410

ngauge_front

2005 6.0

Uniden_PC68LTW

Picture_040

11T0007_2011_FORD_F250_Manufacturers_View

Swamps Timing 1

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 290 (members: 0, guests: 290)

Top