Reply to thread

Message: [QUOTE="09stroker, post: 254028, member: 759"] The D2's mount is a square tubing welded to the bumper brackets by a piece of flat iron on each end and the dually's mounts are a piece of I think 2" angle iron with the pattern cut out of part of it to fit onto the other side of each bumper bracket. Also welded. It's hard to explain but if you saw it, it would be real simple. As for the wiring, the D2's have the hot wires run to the uprights switch #1 and grounds to either the battery or the body. I dot remember but it doesn't matter. And for the dually's which replaced my fogs I just cut off the factory fog light harness ends and the rigid wire harness ends and soldered the rigid ends onto the factory harness. It's just like using factory fogs. [/QUOTE]

Verification

Random media

drag_wheels_mounted

BW_362_sx-e_175-30_injectors

slayer3

2011-07-06_22-25-01_636

secret_lab_2

My 6.4s

24 37

Ben's 96

New grille

eleanor_part_two_42_

Latest posts

S
6R140 surging issue
- Latest: Smokin 6.0
- Today at 12:26 PM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

No members online now.

Total: 266 (members: 0, guests: 266)

Top