Reply to thread

Message: [QUOTE="Bobs 7.3, post: 1480034, member: 8460"] Pulled both valve covers no injectors leaking out the spouts with the harness disconnected and cranking and no oil coming from any of the injector top o-rings while cranking and at 586lbs of pressure from the hpop. Plugged the harness back in and she fired right up and all the oil spouts shot the same amount of oil out at idle. Buzz test cleared all 8 injectors great so no electrical side problems. Any suggestions? Looks as either the hpop or ipr. I can't see the hpop working then not working. Can't explain the oil in the ipr not icp plug on the inside of the rubber gasket but dry all over the gasket and oUT side of the plug! Can it get oil internally into the solinoid somehow? [/QUOTE]

Verification

Random media

White Out

163672_134264049970590_100001609875209_226197_1386311_n

2013picstitch

8_lug_truck

My OBS E-Fuel system

004E1EBD-4F6C-4537-8594-D5761F9C91D8

engine31

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 765 (members: 0, guests: 765)

Top