Reply to thread

Message: [QUOTE="MAC, post: 20992, member: 326"] Best way to flush it is drain out all the coolant, fill it back up with a water/rad flush mix then go drive around a bit, and drain all that out, and just keep filling it up with water/rad flush till the water comes out clean. Some people will tell you up take out the black drains, but most the time the bolts round off then you're SOL As for what coolant to use I run Fleet Charge, you can get it almost anywhere, I got mine from TSC, the coolant is already premixed with the SCA's so all you have to do is mix it 50/50 with distilled water. Also these engine take 8 gallons of coolant, so you'll need 4 gallons of coolant and 4 gallons of distilled water. [/QUOTE]

Verification

Random media

d60

20140325_095107

rick-astley_reasonably_small

top-1

mpd_2

2008 King Ranch motor work

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

DEEZUZ

Total: 415 (members: 1, guests: 414)

Top