Reply to thread

Message: [QUOTE="caladash, post: 819947, member: 754"] No need to disconnect anything when using a 10 dollar bump start button from harbor freight. Don't even need to turn the key! One wire to the battery and other to the starter. Done! No disconnecting anything and potentially bending a pin, wire, etc. But....I did some work for a buddy of mine and my new valves should be here in the next few days for my heads at the machine shop. Then my forged rod motor can go in. Took me a few hours to get the front end disassembled. Wasn't to bad at all. An 8mm, 10mm, 13mm, and phillips! I'm really curious to find out what caused my drop in compression. So far one snag, my pulley puller sucks! Can't get my fluidampr off. Can anyone recommend a good one? So here is where Im at so far. Definitely upsetting looking at it like this! [ATTACH=full]119506[/ATTACH] [ATTACH=full]119507[/ATTACH] [/QUOTE]

Verification

Random media

004E1EBD-4F6C-4537-8594-D5761F9C91D8

100917_195156

train_wreck

Minotaur Parameters

919123_367663446688562_990954678_o

qu7a7a3y

IMG_4966_1_

f250_rendering

2012-03-28_22-54-33_587

My first pics

iphone_pics_706

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

6.7powersmoke

Total: 703 (members: 1, guests: 702)

Top