Reply to thread

Message: [QUOTE="genuineford, post: 92819, member: 99"] So I wanted to make this so it would be easily removable. I would just like to be able to take it off in a half an hour or so in the spring. I don't want to have to drive around with the plow mount on all summer long. I was trying to figure out how I was going to do this so it would not interfere with the RSK and from the looks of it as long as it doesn't go on the outside of the frame. I believe I have the bolt hole in the correct location so it will mate up with the RSK. I had some C channel laying around and it just happened to be the perfect size to slide on the inside of the frame. I just had to cut a small strip off of it and round off the corners of it. This will work good because it locks it in place very well. I am then going to weld a nut on the inside of the hole so I do not have to worry about holding it when trying to take it on and off. C channel. [URL=http://rides.webshots.com/photo/2940242120101830101UuwcvZ][IMG]http://inlinethumb05.webshots.com/48964/2940242120101830101S600x600Q85.jpg[/IMG][/URL] [URL=http://rides.webshots.com/photo/2519153950101830101nIIOQg][IMG]http://inlinethumb50.webshots.com/48305/2519153950101830101S600x600Q85.jpg[/IMG][/URL] Bolt installed [URL=http://rides.webshots.com/photo/2317541190101830101jbipHd][IMG]http://inlinethumb22.webshots.com/46037/2317541190101830101S600x600Q85.jpg[/IMG][/URL] Inside frame [URL=http://rides.webshots.com/photo/2654561390101830101qvGAWm][IMG]http://inlinethumb60.webshots.com/49019/2654561390101830101S600x600Q85.jpg[/IMG][/URL] [URL=http://rides.webshots.com/photo/2684331770101830101xdJTrr][IMG]http://inlinethumb44.webshots.com/47019/2684331770101830101S600x600Q85.jpg[/IMG][/URL] Cut to length [URL=http://rides.webshots.com/photo/2549416970101830101ZBbyzn][IMG]http://inlinethumb56.webshots.com/49015/2549416970101830101S600x600Q85.jpg[/IMG][/URL] [URL=http://rides.webshots.com/photo/2905310690101830101yduEVd][IMG]http://inlinethumb29.webshots.com/48732/2905310690101830101S600x600Q85.jpg[/IMG][/URL] Mock up. [URL=http://rides.webshots.com/photo/2215962510101830101zUfOyl][IMG]http://inlinethumb12.webshots.com/47243/2215962510101830101S600x600Q85.jpg[/IMG][/URL] [URL=http://rides.webshots.com/photo/2784767770101830101rHcDZn][IMG]http://inlinethumb59.webshots.com/46650/2784767770101830101S600x600Q85.jpg[/IMG][/URL] Tacked in place [URL=http://rides.webshots.com/photo/2783791450101830101MBYiIr][IMG]http://inlinethumb09.webshots.com/45960/2783791450101830101S600x600Q85.jpg[/IMG][/URL] One of my finished welds [URL=http://rides.webshots.com/photo/2471233010101830101jssPms][IMG]http://inlinethumb55.webshots.com/49462/2471233010101830101S600x600Q85.jpg[/IMG][/URL] Set in place with the old bumper off my wrecked 83 F250 [URL=http://rides.webshots.com/photo/2900263130101830101sbptWG][IMG]http://inlinethumb55.webshots.com/47286/2900263130101830101S600x600Q85.jpg[/IMG][/URL] [URL=http://rides.webshots.com/photo/2180467240101830101TgrLwi][IMG]http://inlinethumb14.webshots.com/48781/2180467240101830101S600x600Q85.jpg[/IMG][/URL] [URL=http://rides.webshots.com/photo/2448156950101830101AZLngi][IMG]http://inlinethumb43.webshots.com/48170/2448156950101830101S600x600Q85.jpg[/IMG][/URL] More to come. [/QUOTE]