Reply to thread

Message: [QUOTE="powerlifter405, post: 268213, member: 2044"] I did the interior as much as I could reach on my 02 w/ and it helped a lot. I used the CCF and more foil backed padding, got it all super cheap. It was a good reduction but had I fully used the CLD and the MLV I think it would have turned out better. If I can figure out how to get the dash off, COMPLETELY, I'd do every bit of exposed sheet metal. I traded PM's w/ someone who put 2-3 layers of just the CLD on his 99 CC. 3 on the floors and 2 on anything vertical and 2 on the ceiling. He mentioned the biggest noise was from behind the dash where he couldn't reach and all the windows. 1 thing to think about here, after having messed w/ a BMW, I saw the amount of materials they used. Lots of under coating, CLD all over the floor boards, doors, etc.. and what appeared to be MLV built into the carpet and it is very quite inside. If money is an issue, and it is for me, I'll use CLD and MLV on my 08 this summer. I'll spray the insides of the doors as it was mentioned if you live in hotter climates, the cheaper butyl based products can sag and smell bad. [/QUOTE]

Verification

Random media

srt1

'07 5.9 Cummins

Dsci0790

2008 King Ranch motor work

am-15010-steering-pod-auto_1_

silver_truck_carriage_works

dd_maximizer_hardware

20200209_165912

truck

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 583 (members: 0, guests: 583)

Top