Reply to thread

Message: [QUOTE="mandkole, post: 269031, member: 4630"] Nice thread-- On the 5 spd, the factory shifter covers are worthless after they've been removed a few times. As a 30 min trial, cut up pieces of pipe insulation and lined the inside of the shifter. The noise reduction was quite noticable-- I also have factory rubber mat (vs carpet) and the truck is now almost as quiet as my inlaws 97 CCSB (w carpet and auto). I got some composite vibration dampener material (don't recall brand name)from a buddy of mine who supplies to Daimler Truck . It has adhesive on one side and requires only 25-30% coverage. When I had the bed off, I put some on the top of the 5er plate under the bed and between the bed and frame pads. The low frequency noise at freeway speed has gone way down. He also wants it put on the inside of the doors, the firewall, floor, above the headliner and behind the rear seat below window. I just need the time... [/QUOTE]

Verification

Random media

A little transformation

57F8E78E-8D4D-4C68-8835-74C315516DEA

Rear differential cover 08

E3C86D5E-47C5-49F5-8132-236D0B14FEDD

0828151548c

08_xl_rear_left

Window switch comtrols

2012-08-03_16-18-45_504

1832140C-D87D-4562-BBE0-E67000873B1C

Transmission pan

phone_pics_099

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

DEEZUZ

Total: 487 (members: 1, guests: 486)

Top