Reply to thread

Message: [QUOTE="GoMopar440, post: 1528659, member: 31270"] Got the tuner mount finished up today. A few of the screw ends had to be shortened, as well as one of the screw heads needed ground down for clearance. Different screws would have been better, but it was what I had on hand. I'll still need to trim some reliefs in the dash opening to clear the aluminum bracket tabs on the left and right sides. All in all it looks like it has turned out well so far. And, as promised, here's a few new pics from today. The first pic shows a straight on view of the hole in the dash that this tuner and mount will be filling. The shifter is in Park in this pic. In the second pic I put the shifter in Drive and took a pic from the perspective of how I would see it while driving. The other two pics show the tuner mounted in the now assembled dash insert with my custom mount. I used three screws in the middle to hold the T-slot part from the window mount. Since those screws were just a tiny bit too long to sit flush in the T-slot thingy, I was able to use those same screws to allow me to aim the tuner upwards a little bit. They also dig into the plastic back of the tuner and act as a lock of sorts. It's VERY solidly mounted now. I'll get on hooking up the power wire and routing the other wires under the dash tomorrow.;) [/QUOTE]

Verification

Random media

avatar1718

IMG_20150122_111833_343

2014 6.7

OUO 525

2008 King Ranch motor work

20151111_135323

OUO 525

SOIdelaynumbers

IMG_20150122_121625_584

misc_2013_112

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Yesterday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Yesterday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

No members online now.

Total: 491 (members: 0, guests: 491)

Top