Reply to thread

Message: [QUOTE="TyCorr, post: 775827, member: 1451"] I rebuilt my new ipr and the orings all looked fine as they should. The ipr is about three months old and the orings were all good visually but I replaced it all anyway. The oil leak did not change. Its originating from the front of the motor. The valley is holding oil. Right up near the hpop. Ive had people throttle the motor as jake(linc locker) suggested and watch and i cant see the oil leak. It must only do it +2k psi under load. The oil sitting in the back of the rear cover is pointing toward this same fate. Im gonna have a crazier buddy come.by and powerbrake it while i stand(i know, bad idea) on the front bumper and look at the oil pump. Ill keep this thread updated. Love the pump but haaate oil leaks, especially considering I pulled my motor to fix them all and replace the oilpan. [/QUOTE]

Verification

Random media

IMAG0569

IMAG1040

20160806_151030

Kardashians

epic4

corbin

Pink_dance-taco

6_4gate_004

Out with the old, in with the new.

1710

Latest posts

G
7.3L fuel pressure with black spring
- Latest: gooseman80
- Today at 1:41 PM
7.3 Tech
PCM replace/repair/compatibility
- Latest: KBMKVIII
- Yesterday at 2:33 PM
94-97 Aftermarket
G
97 Powerstroke PCM not capturing DTCs
- Latest: GRN250
- Monday at 9:13 PM
94-97 Tech
S
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: Smokin 6.0
- Monday at 9:29 AM
6.7 Tech & FAQ
S
Wiring diagrams ?
- Latest: Smokin 6.0
- Sunday at 8:42 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 351 (members: 0, guests: 351)

Top