Reply to thread

Message: [QUOTE="SpartanDieselTech, post: 1284767, member: 22311"] The X-axis normalizer on the accped map is in ft-lbs, while the torque table is in NM. Someone screwed up when punching that into the software. Raise everything on the far right column of the accped map (the bottom one of your two pictures) to 1400, from 1500rpm all the way down to the last block. Then, on the torque to fuel map, increase everything down the Y axis of the "958 column" to, let's say, 130 from 2000 rpm and higher. Let me know how those changes run at WOT :thumbsup: Also note that the torque to fuel map you have shown is EOM0, so any changes you make there will only apply when the truck is not on any form of regeneration. [/QUOTE]

Verification

Random media

Cquartz finest on hood

2011_darth_vader

IMG_20140823_185632_160

donor_harness_1_

front_axle_swap7

photo-1

step_4-1

20170502_2125491

Truck36

247049_1985944375891_2003260_n

Latest posts

I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Today at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Yesterday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech

Members online

No members online now.

Total: 676 (members: 0, guests: 676)

Top