Reply to thread

Message: [QUOTE="TARM, post: 72821, member: 578"] Would the Miklor's offer the strongest even clamping force highest quailty? Then there are the Virbants that also seem to be made well Then you have the ones like Turbo Hose R&D has with the heavy duty springs A few others. Of all of them the ones I have heard the best things as far as clamping force and quailty of build has been the Miklors W4 W5 series Wanted to see what others thought, had experience with etc... [URL="http://www.mikalor.com/eng/company/mikalor-hose-clamps/3-high-pressure/"]Miklor's High Pressusre HEavy Duty Clamps[/URL] [URL="http://www.turbohoses.com/Clamp.htm"]Turbo Hose R&D Super Heavy Duty Spring T bolt Clamps[/URL] [URL="http://vibrantperformance.com/catalog/product_info.php?cPath=1024&products_id=751"]Vibrant Heavy Duty T bolt Clamp[/URL] I am leaning toward the Miklors so far. One of the specs I saw posted in a forum was the 3" W5 had a 30 BAR rating on sealing force. That's 435PSI !!! I would much rather only have to single clamp if possible rather than run a cheaper bolt and double clamp everything and end up dealing with stripped bolts and bend clamps etc.. Frankly I loth worm clamps so much I plan to swap out every one on the motor. [/QUOTE]

Verification

Random media

2008 6.4L pic4

179278_1660325862800_1076760051_1780798_2226307_n

New "DA" CAC cold tube

my 06-6.0

bringing_home_from_the_fab_guy_1_

Minotaur Parameters

DSCN3519

IMAG1040

ICP_Flat

eleanor_part_two_72_

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 479 (members: 0, guests: 479)

Top