Reply to thread

Message: [QUOTE="TARM, post: 73524, member: 578"] I think I have noticed a number of people using clampco brand. I assume / hope that means they are good. In looking I have not seen anything bad about them. V-Ref, How much did they cost roughly per clamp? I wonder what it is that makes some peoples single clamped hoses to hold up to 60 psi and others have to double clamp to get 50 to hold. I know how tight the big rig radiator hose is to get on the pipes and ports. I also tend to wonder if single clamps while holding as in not blowing off are still actually leaking air when you get up there in pressure? V-ref, Didn't you find that you had some hose clamp junction points leaking when you pressurized up hgiher than most recommend but those hoses were not blowing off or the clamps moving? I tend to wonder what we would find if we were able to pressurize our systems to 40,50, 60 psi and then spray all the various joints with say soapy water? My bet is I think 75% of those that have installed new turbos and systems that required the various clamp and hose seals to be broken would find at least some leakage. I could be completely way off but I think more people have leaks at pressure than they realize. [/QUOTE]

Verification

Random media

2012-03-13_12_35_091

2011-05-25_07-27-13_250

2012 f250 sagging

rbp_1

cup

PSD

20170106_170559

new_grips1

20140325_095156

IMG_20140210_132957_819

20140904_154758

Latest posts

02 F250 7.3 Will crank, WTS stays on, no start, no OBD
- Latest: Sterling6.7
- Sunday at 8:57 PM
7.3 Tech
P0087
- Latest: DEEZUZ
- Sunday at 11:49 AM
6.4 Tech & FAQ
2015-2019 6.7 HPFP New In Box
- Latest: lincolnlocker
- Jun 1, 2026
Engine and Drivetrain
First 6.0L (56k warning)
- Latest: adrianspeeder
- May 26, 2026
6.0 Tech
Extra external motor oil cooler?
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech

Members online

Queenandkingpowerstroke

Total: 559 (members: 1, guests: 558)

Top