Reply to thread

Message: [QUOTE="JuststrokeIT, post: 656275, member: 3301"] I did this a few months back it's definatly not a bad job at all once you get down to it hardest part was the up pipes which I ended up just torching off and buying Rudy's custom up-pipes for 6.0 manifolds. I pulled the heads with the manifolds and part of the uppipes still attached to help grab n pull up didbt loosen the motor mounts or anything else and didn't dent or break anything along the way. I even put the new manifolds on the head before install as I'm sure it's a real pita to put them on once the heads on on the passengers side. 2 of the head studs have to go in with the head when u reassemble it I used zip ties to hold them in place so they wouldn't fall down or catch on anything but other than that it's pretty much straight forward [/QUOTE]

Verification

Random media

NL64PSCSK

MBRP DP

2011-12-11_16-18-53_375

dodgefail

photo_38_

BODY1

Built_Up_Motor_2

my stufff

112

Got the Decals

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Joush

Total: 850 (members: 1, guests: 849)

Top