Reply to thread

Message: [QUOTE="sideactiondiesel, post: 1379322, member: 5070"] Man I hear ya. That is frustrating to say the least. Well bring up cam and crank signal. see what one is dropping out first and go from there ... If you will probably see the crank drop out first and then the sync will go to "no" If so just check and make sure that CKP is all the way down in its holder. Have had some plow truck over time even swell behind sensor and cause the gap to be to far and the tone wheel can not be picked up.... Again make sure the sensor gets pulled out and you look at the hold down tab where the bolt goes in. " It will need to be strait" If not this means that sensor is not seating in the CKP bore and is causing your issue. LMK what you find [/QUOTE]

Verification

Random media

2013-03-29_11-53-34_365

08733985

Excursion_new_front

no_limit_receipt_3025_100-page-001

11050736_10153176647948050_1365818109064228304_n

Frosty 6.7

95_Bronco_conversion_pics_010

2012-09-07_20-40-07_144

2012-08-19_17-15-16_620

New Bumper

New Headlights 3

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 178 (members: 0, guests: 178)

Top