Reply to thread

Message: [QUOTE="Hotrodtractor, post: 261252, member: 25"] Thanks to Bryan and Ray finding the courage to man up last night and help me with my beyond sketchy housing spreader setup on the front axle - the air locker is now in place and shimmed correctly. I bought a new housing spreader for the job and it was suppose to be able to do up to a Dana 80 axle.... it couldn't even properly and safely spread this Dana 60..... add in some rednecks and some frustration - the housing spreader, combined with a porta power and some big brass balls got everything dropped down into the housing. No photographic evidence was taken so I didn't have to add in the disclaimer "Don't try this at home kids". A new housing spreader is on my design and construction list for the next project. One step forward, two steps back. The pitman arm did not ship for whatever reason, the new diff cover is missing all its hardware and dipstick right out of the box, axle seals I bought are wrong, issues with the tcase clocking ring. It is however getting closer to completion. LOL [/QUOTE]

Verification

Random media

My white 06 f350

rear_axle_9_

phone_pics_11-24-12_001

13_hid

silver_truck_driver_side_bmf

baja_rack_1_PIC

eleanor_part_two_13_1

983C27CB-9ADA-4E33-B2DF-80CBFF8A98BF

Memorial_11_054

truck18

Latest posts

10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

No members online now.

Total: 704 (members: 0, guests: 704)

Top