Reply to thread

Message: [QUOTE="Boostfed, post: 78283, member: 796"] These gates are a little tricky to plumb. I ordered everythign for shones truck thinking they'd be 1/8th inch-Wrong... The gates come with water ports tapped 1/16NPT and adapters that are 1/16- -4AN. For shone's, I'm using all -4 Steel Braided stainless lines. I'm pulling coolant from the EGR delete plugs and running the lines up along the intake mani to the gate. For the top port there is very very little room to work with. I've been working on building a custom banjo fitting that we got as a weldon fitting that I'm going to weld a -4AN bung onto and hope that it clears the cab. The only draw back to the Tial gate that I've found is that you cannot rotate the top section of the gate to move the ports to a more convienent location. 4G63's huh? You boys got leashes for those cranks? They'll prolly wanna go for a walk soon! Lol, jk... You'll definitely want bigger that 1000cc injectors if you're gonna run E85 and make power, especially the power availible from a 42R. C16 is fuel, nearly the best out minus Q16 but much friendlier to your fuel system. My honda says it wants to get in on a few hits with the 4g63's :-D [/QUOTE]

Verification

Random media

IMAG0723

026

photo_8_2

1454550_10200346642387597_1700296517_n

2012-10-21_17-45-50_733

IMG00009-20091015-1448

photo_15

side view

ELEANORS_BUTT_PLUG_LI

Interior

MG_6990

Latest posts

S
F-350 Dually tire size
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- May 22, 2025
6.4 Tech & FAQ
Won’t start issues
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ

Members online

Sharningailt

Total: 349 (members: 2, guests: 347)

Top