Reply to thread

Message: [QUOTE="oldschool, post: 396215, member: 1457"] just did this mod a little differant. mine didn't have the bowl, just the brass plug. I completly gutted it, drilled and tapped for 1/8 npt like he did. only thing differant, was i didn't cut up the old regulator. I wanted to save the bolt holes so I could mount the regulator. I did have to make new lines comming off of the front of the head that would reach the regulator in a mounted position. Also kicking around the idea and havent done it yet, but the brass plug that holds in the spring, was thinking of drilling and taping, using a 1/4" all thread with lock nut and copper washer behind the nut so the pressure could be adjusted easily. [/QUOTE]

Verification

Random media

IMG00008-20091015-1444

IMAG1018-1

8_LUG_Bragging_Rights_July_2012

Shipped_to_Rudy_s

08 6.4 Parts

wickedjester_com_2

New Headlights 4

2012-05-05_12-02-46_956

2012-01-20_13-52-16_998

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 519 (members: 0, guests: 519)

Top