Reply to thread

Message: [QUOTE="shmoozer, post: 1353300, member: 7523"] Truck build post on PSA. I'm currently in the process of acquiring the final parts for my little build. Truck is an '04 with the basic mods, studded, ******d, regulated return yada yada yada... Truck for the time being is a DD although I do have a company truck that I spend most of my day in. It also doesn't tow but maybe 5-10% of the time and it's never very heavy. Mostly a fun street truck. I'll be doing all of the work myself cab on, probably in my driveway. I've got a set of 205/100's that are getting sent out to be rebuilt and freshened up. Who would you guys recommend sending them to? I was thinking either Holders or Warren etc. I picked up a new in the box 6.7 pump for a steal and ordered an XDP single hole sump similar to Beans. Next thing I need to order is my turbo setup, plan is to go non-VGT. I'll be going with MPD's new kit, I really like how the pedestal incorporates the oil feed. I'd like to hear what y'all recommend. I was thinking about an s366 sxe, possibly a 369. Thoughts? Trans will get built down the road once I recoup some funds. In the mean time I'll have a reduced fuel tune written to help keep it alive. My big question is while I'm doing injectors what else can and or should I do as far as valve train components? Pushrods, rollers etc. I don't know what all can be done with just the valve covers off. If you guys see anything that I'm overlooking or have any hints please let me know. I've never really dug this far into my truck before. But know my way around an engine. It'll be a bit of a slow process, but I'll try and update this with pics as I move along. Sorry for such a long post, been planning this for a while and wanted to give as much info as possible. Thanks again guys. Might as well start off with a pic of my truck. [IMG]http://uploads.tapatalk-cdn.com/20160318/edd2c193f657813adf3cb18f1e185e80.jpg[/IMG] Sent from my iPhone using Tapatalk [/QUOTE]