Reply to thread

Message: [QUOTE="Mark Kovalsky, post: 1144845, member: 1654"] If the TCC wire is shorted to ground the converter will be locked at all times.This will also set an electrical fault code for the TCC solenoid. Do you have this code stored? If not, then the wiring is not shorted to ground. Did you see if it stalls with the trans connector disconnected? You don't have to start the truck then disconnect it, you can disconnect it with the engine off and still start the truck. Don't disconnect the range sensor on the driver's side of the trans, though. Only disconnect the bulkhead connector on the passenger's side of the trans. [/QUOTE]

Verification

Random media

2017IC

10200665628070462

P6190010

2006 f250

Dyno603b

phone_2017_580

ADgerotor2

under the hood

Real Trucjs

1291077686468

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 8:29 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 498 (members: 0, guests: 498)

Top