Reply to thread

Message: [QUOTE="dsberman94, post: 1511690, member: 12667"] You buy an adaptor to go from the factory radio plug and you match the colors on the harness that comes with the unit and use the red crimp butt connectors to splice it together. Add some tape and Plug the sides in to their other end. The radio at least in my truck doesn’t require an adaptor to work. It just uses the factory plug style to plug in. The particular one I have has the usb plug in the back and comes with an extension cord which I run straight down and bring it out the bottom of the dash above the trans hump and hang it on the dash hook. It’s super easy. You also need the correct dash kit. I usually go to best buy for the kits because they usually have everything in stock and can explain it to you if you have any questions. YouTube is even easier. Factory radio removal will require a special tool which you can probably make out of some mechanics wire or buy them as they’re super cheap. [/QUOTE]

Verification

Random media

P32001971

110321_133033

no_motor

Misc_038

Balance Master

jeep_side_updated1

6.4 Single Turbo

20140706_190146

Balance Master

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

fastersteve

Total: 554 (members: 1, guests: 553)

Top