Reply to thread

Message: [QUOTE="Mark Kovalsky, post: 385823, member: 1654"] I have no idea what you are looking at to get 1.5v. Nothing on the trans should be at 1.5v. That cannot be an electrical problem. The ONLY way there is no movement is something mechanical. It could be too low on fluid, loose/missing internal filter, failed seals, failed torque converter, or a failed pump. It could also have grenaded the planetary gears. There are a whole host of things that could cause this, and only low fluid or a bad filter could be fixed without removing the transmission. Looking at an electrical connection is usually as useful as changing the winter air in your tires for summer air. It makes you feel like you did something, but you didn't. If you are not checking the wiring from the PCM to the sensor with a meter you don't know if the circuits are good or not. On the other hand, this problem isn't electrical, so it doesn't matter if the electronics are working or not. The trans needs to be fixed. [/QUOTE]

Verification

Random media

IMAG1012

Dropped on 4800lb. coils and no blocks

tinted windshield

Interior

Cfakepathimage11-14super-duty-cowl-hood01426173812

misc_2013_115

17TowRig

secret_lab_2

Latest posts

6R140 surging issue
- Latest: Sterling6.7
- 8 minutes ago
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

Sterling6.7

Total: 481 (members: 1, guests: 480)

Top