Reply to thread

Message: [QUOTE="benjamindurtka, post: 1450626, member: 24910"] I'm getting a slight vibration while driving, gets worse under a load and making hard turns. Hubs and u joints on front end are new. It's starting to pop out of 4 wheel low and makes a loud bang when it does. When I turn it makes a pop/clunking noise. I just serviced the front differential and everything is tight. I checked the rear differential because the turning had me thinking it may be that but everything is tight there to. Drained the transfer case and the oil is a little dark but not a spec of metal or anything. There's atf at the front of the transfer case, not enough to drip but if you clean it off (in the past I have) it comes back. What else can I do to check the transfer case? Maybe put it on Jack stands? Thanks for any replies. 2001 F-250 cclb 7.3l 4x4 forged rods, ebpv, muffler, dp80hp dd. [/QUOTE]

Verification

Random media

td_trucking

he451ve compressor housing

diamond eye exhaust 5

EDGE Insight CTS - Cheap Insurance

IMG_20130603_143152_263

IMG_20150829_231111794

2011-10-21_17-37-23_890

1996 F250 460

east_coast_hair

after1

IMAG01631

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Yesterday at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- May 9, 2025
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 1,200 (members: 0, guests: 1,200)

Top