Reply to thread

Message: [QUOTE="skevac, post: 1215049, member: 5865"] A little update. Went to drive it home the 4x4 light was out. I decided to try and put it in 4 wheel drive turned the knob at approx. 15 MPH and it made quite a bang and I'm pretty sure went into 4 low. Stopped put it back into 2wd and drove it home 5 miles. Transmission was shifting fine and the TC was locking up normally. Got home shut it off. Went to go somewhere else light still blinking backed up from my garage made one hell of a bang again in reverse. Pulled forward everything seeming normal and then decided to stop in my drive and try to back up no reverse. Try and drive forward it's grinding. Put it in neutral then back to drive and it moves but i can tell by the way it's driving it's in 4wd with the knob still in the 2wd position. Get it back to the garage and now it won't go forward or reverse. I just left it there for tonight. Seems to be the transfer case to me but looking to have someone point me in the right direction. Is the transfer case computer controlled? If so any chance my tunes or tuner could be causing any of this. Thanks [/QUOTE]

Verification

Random media

Picture_048

original_eleanor

IMAG1000

Stock_Fuel

625521_10150959063566300_1077575649_n

Merry Christmas to me!!

OEM_Cooler

3-7_096

20120418_153425

Underside_11

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Total: 1,042 (members: 2, guests: 1,040)

Top