Reply to thread

Message: [QUOTE="Zmann, post: 394636, member: 2025"] If u guys get this pan and are not reusing the old oil you need 15 quarts to refill .. 14 put me at the cold mark when it was hot so I needed to open the 15th to top off I drained about 8 from the stocker so it's is about 7 1/2 more quarts I have noticed no cooler temps ,, but I never had a chance to compare towing or hills so I imagine normal operating temps weren't going to be less simply because the cooler bypass opens at 170* so my avg temp of 175 wasn't going to be affected by this pan i was able to transfer the big magnet out of the OEM pan but I had to shave some off one side of it to get it in past the tubes Installer tip ,, just like the stock pan .. loosely install a couple of bolts to hold the pan up then do the ones near the cross member that are a biotch to reach otherwise you likely be removing some to get the pan to wiggle enough to get those in [/QUOTE]

Verification

Random media

IMAG1039

ImageUploadedByTapatalk1367426129_317571

joe_hueser_black_back

DE_4_Pipe

7d6def78

2012-04-12_11-29-31_531

0828151548c

DE_4_DP

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 842 (members: 0, guests: 842)

Top