Reply to thread

Message: [QUOTE="wyoradcat, post: 815770, member: 2033"] truck is a 2003 6.0:driving down the road and truck started to have a bad fuel knock and running rough. died and I tried to read the codes on tach but couldn't remember how and turned the key on and off four times and then tried to start motor didn't crank and was locked up. in fear of bending a rod didn't try to start again. removed glow plugs and bumped starter over to crear fuel from cylinder. remover valve cover to replace injector number seven and found injector hold down bolt broken. how can I remove the hold down and injector with out using the bolt. trucks about due for studs thinking of pulling heads off and fixing it that way but would like to get it going before it snows to much again thanks. [/QUOTE]

Verification

Random media

mcgauphys_4_link

Center Console

FB_IMG_1524919636271

WOP Nitrous kit

Misc_044

20160102_140731

GZENGINEBAY

pistons

2008 Ford F-250

Latest posts

S
4r100 P0715/P0717 trouble codes.
- Latest: smokeybear73
- Today at 2:06 PM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Yesterday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

Griffin

Total: 514 (members: 1, guests: 513)

Top