Reply to thread

Message: [QUOTE="Dieselboy., post: 747673, member: 1232"] Judging by your screen shot you will have quite a few dots to plot out. My EOT value is set at -8192.00, and I have 7 lines in the F6 view like you showed The % is limiting fuel PW compared to RPM, basically to control rev limiter. Set it all to 100% it will fuel 100% of the value you have programmed. For example as I have a vague understanding but cant explain it very well.. If you have 100% fueling from 2800rpm up and on my drag tune persay, anything 2700rpm and under is 50%. If I make a shift that drops rpm below 2700rpm it will cut fuel PW in half (or whatever you have programmed) So, my drag tune calls for 4MS PW, if the scenario happens as I listed if It falls below 2700rpm it would limit PW to 2MS. This is my understanding, so dont take it as gospel [/QUOTE]

Verification

Random media

2013-01-26_12-22-42_898

6_0_intake_1

eleanor_part_two_20_

Mishimoto 6.4 radiator

6553C45D-EC91-4078-9818-02B535CA2CF1

Joshua tree

100_0075

Kazakhstan

20140613_111850

IMAG0070

Latest posts

10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

No members online now.

Total: 843 (members: 0, guests: 843)

Top