Reply to thread

Message: [QUOTE="JCart, post: 1562097, member: 1238"] Back in the day lots of guys gutted the EBPV assembly out of stock pedestals. I used a zip cut saw and cut off the EBPV aluminum cylinder, that housed the EBPV oil driven piston. Once off I drilled and tapped as I recall two ports in the exposed cylinder housing (that remains attached to the pedestal, drill and tapped the actuation solenoid hole and plugged all fore noted holes with brass plugs and JB weld. At the exhaust rod end there is an opening in the pedestal that I JB welded closed. Pedestal has been working away on its third truck now…. Lastly with a ratchet wrench you can install the turbo once pedestal is on the engine. You need to set long bolts in pedestal prior to setting in place then rear ones will slide in and up after it’s set in place. Cheers, j [/QUOTE]

Verification

Random media

2012-08-31_17_31_06

amps

IMG_20140307_085558_481

PHP Timing map 1

step_2

1000_1

30098_1203722752143_1800846961_410279_3523261_n

IMG_20150121_190450_462

Latest posts

B
PMF Traction Bars - Fixed vs Floating
- Latest: Benson1025
- Today at 11:34 AM
Suspension, Drive Train, and Tires
2000 f350 dually lariat
- Latest: ju015dd
- Yesterday at 9:10 PM
7.3 Aftermarket
new build input welcomed
- Latest: btoler4th
- Yesterday at 3:37 PM
6.4 Aftermarket
OEM LED sport headlights
- Latest: ghohouston
- Yesterday at 8:37 AM
2017+ 6.7 Aluminum Super Duty
Gauge cluster face plates
- Latest: crash86
- Sunday at 5:15 PM
6.0 Aftermarket

Members online

No members online now.

Total: 458 (members: 0, guests: 458)

Top