Reply to thread

Message: [QUOTE="dseitler, post: 1120108, member: 14112"] [IMG]http://tapatalk.imageshack.com/v2/14/11/23/914cb18ef78e03f29213715975b7a7bd.jpg[/IMG] Turbo swap complete. Took about 2-1/2 hours to complete with the service on the engine. Motor sounds a little different at start up and a little quieter. Most definitely moved the power band up the RPM range. Spool is 100 - 150 RPM later than the 70mm but not bad. Still trying to get better numbers on that but can tell the difference. What I have noticed is more power above 2400 RPM. Peek boost for the 70mm on my setup was 48lbs. I recorded a peek of 47.7 yesterday but I sure I can do better I really wasn't on it to hard. I will get better info Today and tomorrow and post. Just early observation of what I've seen so far. I put another sensor port on the discharge side of the cooler to see if that is a restriction for me. I have to program that in so I can record it. Never fails every time I get excited about testing again all it does is rain. D Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

Yes thats a 6.0 dash

0241

13_DP_Mag_Shoot

2012-03-28_22-54-46_458

477317_367662810021959_603443716_o

The Truck

IMAG0523

39092_1458258390678_1659931355_1101772_820668_n

Me trying to balance a power stroke

2013-06-22_14_07_41

576

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 640 (members: 1, guests: 639)

Top