Reply to thread

Message: [QUOTE="robrike1, post: 1550158, member: 33184"] Well, I put everything back together after verifying glowplug and harnesses are good. Get good readings off each plug connector going from wire harness to plugs. The problem is the engine harness part that goes from glow plug module to the driver side gp harness. Ohm from one end of plug to other is dead, open. I cannot see a break anywhere but still get codes for 1, 3 , 5 and 7. Can I just run new wire from glow plug module black connector to part that plugs to gp harness on driver side? Basically bypass the break from one connector to the other in the harness loom that runs over top of block. It has other wires that branch off to sensors and I have no issues with sensors. It is like those 4 wires somehow were severed but d@mn if I can see where. Thanks, Robert Sent from my SM-G955U using Tapatalk [/QUOTE]

Verification

Random media

ICP-DC_Swamps_StgII_175

triples

New Rims

images

798381_10151319132373434_1889678393_o

0208151604a

slayer1

blacktruck

photo-6

Blue Spring Upgrade

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Thursday at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- May 9, 2025
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

Christianzek

Total: 354 (members: 1, guests: 353)

Top