Reply to thread

Message: [QUOTE="BlueWaffle, post: 307934, member: 16"] ooooooooook....was in the process of pulling the uppipes to inspect the bellow and look for cracks. when I was unbolting the y pipe from the manifold, i found that the top bolt was sheared off. basically the y pipe was only clamped on one side. there was still no soot which is weird but that has to be the source of that loud ass whistle. so i guess we were all wrong. doesn't seem to be the uppipes and the turbo wasn't the likely source. I'm still glad I ended up pulling the turbo and checking the wheel. whether or not it's "normal" for the blades to contact the housing (one builder said it shouldn't even w/o oil pressure and one said it could) I'll still feel better having the center bearings checked out. hope this takes care of it! [/QUOTE]

Verification

Random media

Betsy_on_DYNO

Our 2.6 Sled Truck

95_Bronco_conversion_pics_010

garage_at_night

08_xl_front_left

Acid rain cloud

Rudys

photo_34

motor1

IMAG0455

Front End

The wife taking the truck out for the first time..

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 177 (members: 0, guests: 177)

Top