Reply to thread

Message: [QUOTE="Wayne, post: 382315, member: 863"] [ATTACH=full]90964[/ATTACH] Hopefully this helps. If you're putting around in front wheel drive it's probably not too bad, but putting down much power can hurt stuff in front wheel drive only. On your gas filler neck you could just order the diesel one, or do like I did on my '84 7.3L bronco conversion where no diesel version filler neck is available; just grab a die grinder, and open it up all the way. Of course you'll need to remove it from the vehicle to keep it clean, but do a good job, and you should have no problem. Maybe the down time waiting for your rear drive line will give you a chance to properly address your warm up valve. No reason you shouldn't be pulling in mid to high teens though. baby it when properly running, and you should be looking at high teens. [/QUOTE]

Verification

Random media

032

ABE23F30-8C40-41F1-A971-D15A7F7BD978

IMAG1370

DSCN3280

6_7egrblockoff-500x500

20180513_171405_Burst01

heavybag

installed1

CoCoNut Porter

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 592 (members: 0, guests: 592)

Top