Reply to thread

Message: [QUOTE="rolltidediesel, post: 1444042, member: 25578"] My vacuum pump was leaking and also my front cover. I tore it down and replaced all the seals on the cover. Got it back together and was still leaking but only from the vacuum pump now. So I again tore it down and found that the bolt closest to the little red seal and screen on the pump was not seated right. So again fixed that and started it up. Ran for a minute then yet again started leaking from pump. So for the 3rd time took off the pump. So here is my question, is the pump suppose to have a large quantity of oil in the cover side? Seems to me something is wrong with it being a pressure part with maybe a little bit of oil residue for friction sake. My truck is a 2012 F250 6.7L w/107K miles now. [/QUOTE]

Verification

Random media

rear_axle_2_

1291077660147

Custom Audio Build (extended cab 6.4L)

IMG_20110628_153635

TCS_input

dual_pumps4

he351ve

stuff_032

Turbo_Red_Boost

Picture_058

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Yesterday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Yesterday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

6.7powersmoke

Total: 787 (members: 1, guests: 786)

Top