Reply to thread

Message: [QUOTE="Six_Sloww, post: 1393692, member: 13248"] Only thing I may have to do is swap the feed and return port because the fuel is traveling downhill right now, it would probably cool better going uphill. Oh well, wiring the fans tonight and I'll see what the results are. I'm going to separate the two fuel systems.. I was experimenting to see if the 165 could supply enough fuel to the factory pump and the cp3 but I think it's just causing fuel to cycle through the tank at an elevated rate.. Going to just put a sump on the tank and use the 165 to feed the cp3 and the stock pump to feed the cp4 like I should have done in the first place. I'm also going to separate the return side of things so that two pumps aren't trying to return down one single oem line, I'll run them parallel until they get to the 1/2inch cooler line and run a y block into that. [/QUOTE]

Verification

Random media

IMAG0326

2012-11-03_18-01-21_621

20141215_120010

pass_side1

IMAG0310

5744

bumper_idea_2_

20140325_105524

Latest posts

6R140 surging issue
- Latest: Sterling6.7
- 54 minutes ago
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

Total: 362 (members: 2, guests: 360)

Top