Reply to thread

Message: [QUOTE="Bugman, post: 651568, member: 2289"] As you use the fuel from your tanks you will eliminate water. When you go around a turn you are sloshing the water from one side of the filter housing to the other and contacting the WIF sensor and activating it, then when you straighten out the water leaves the sensor area and the light will go off. This will happen until there is enough water in the housing to trip the sensor full time. You may need to drop your tanks and drain them and let them dry to completely eliminate the water unless you just want to drain it every time that the light comes on. Over time all the water will come out of the tank as long as more water hasn't gotten into the tanks. You don't need to pull the filter to drain the housing. [/QUOTE]

Verification

Random media

2011

IMAG1102

T2eC16R_yEE9s5jFRYjBQtpFBwg-Q_60_1

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

IMAG0331

after1

befor an after

IMAG1096

eleanor_part_two_27_

blk_stainless

Latest posts

T
6.4
- Latest: Tkb6.7
- Yesterday at 11:19 PM
Newly Enlisted
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: 6.0 Tech
- Yesterday at 9:53 PM
6.7 Tech & FAQ
S
6R140 surging issue
- Latest: Smokin 6.0
- Wednesday at 6:40 PM
6.7 Tech & FAQ
B
PMF Traction Bars - Fixed vs Floating
- Latest: Benson1025
- Wednesday at 11:34 AM
Suspension, Drive Train, and Tires
2000 f350 dually lariat
- Latest: ju015dd
- Tuesday at 9:10 PM
7.3 Aftermarket

Members online

No members online now.

Total: 622 (members: 0, guests: 622)

Top