Reply to thread

Message: [QUOTE="TARM, post: 53840, member: 578"] Run it along the frame rail or if you look right infront of the rear axle you will see you have a ton of dead space across the whole body frame to frame. You could run a sch 30 6-8" pipe frame rail to frame rail possibly there as I do not think the drive shaft would come close even sitting on the bump stops. Then run a fill port to one of a few locations. One woudl be to look for a drain plug in the floor pan of the cargo area. I have not looked but I know most have them at various places. You could run hose to that and mount a bulk head fitting there. The other is come off the end and run up to the fuel door and mount a bulk head fitting right next to the fuel port inside the door. Run a small secondary hose as to allow for air displacement and you could fill it fast. [/QUOTE]

Verification

Random media

2003 F250 6.0

previous F250 (07 6.0)

20170502_212417

oil_pan_old

20170409_211825

user123603_pic36082_1375997779

20160924_133950

IMAG0804_1_

DSCF6272

Latest posts

02 F250 7.3 Will crank, WTS stays on, no start, no OBD
- Latest: Sterling6.7
- Sunday at 8:57 PM
7.3 Tech
P0087
- Latest: DEEZUZ
- Sunday at 11:49 AM
6.4 Tech & FAQ
2015-2019 6.7 HPFP New In Box
- Latest: lincolnlocker
- Jun 1, 2026
Engine and Drivetrain
First 6.0L (56k warning)
- Latest: adrianspeeder
- May 26, 2026
6.0 Tech
Extra external motor oil cooler?
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech

Members online

Griffin

Total: 471 (members: 1, guests: 470)

Top