Reply to thread

Message: [QUOTE="Tree Trimmer, post: 983938, member: 716"] if you take a small piece of flat metal, i use 1/2 x 1/8, put two bends in it where your knuckles are, bent at whatever angle you figure you need it to be, and then decide on a length. either 1-2 inches into your palm if you need to not use your finger, or right at where finger meets your palm, and your finger becomes completely usable, no needing to worry bout bending it, touching it, or paying attention to whether or not your using it. with your cut being on the inside of your finger, the plate will keep you from opening it up again, as the plate will keep you from pushing on just the cut, it will spread out all the "push". dont know how well the pic will show up, but see the scar on the thumb? then picture every dark or light line on the index finger going the same direction as the one on the thumb, from knuckle to knuckle, being a scar as well. chainsaw was hungry that day. little superglue, used my plate, 15 mins later was back finishing trimming the tree. superglue and a plate is your best friend. and fwiw, there is matching cuts on the other hand. stitches are overrated. [/QUOTE]

Verification

Random media

twin1

20160526_092545

dwmaloney's F450

shiny

images

Got the Decals

IMG_1577_zpsb783a6ac

20160526_092556

6_7_CAI_1_

20160526_121117

Aux_Cooler

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 753 (members: 0, guests: 753)

Top