Reply to thread

Message: [QUOTE="Pwnm30rdi3, post: 1447211, member: 11359"] Prep work as follows: Clean well with wax & grease remover. Wet sand with 1000 grit, avoiding the clear part for the reverse light. Tape over the reverse light lens. Take a sharp exact-o knife and cut the masking tape around the outline of the reverse light lens. Then spray two light coats of SEM (or similar brand) plastic adhesion promoter. Finish off by spraying the tinted clear coat mixture mentioned in the above post. Continue adding as many coats until you reach your desired darkness. For me I found that: 1 coat is a light tint, 2 coats is a medium tint, 3 coats a dark tint, and 4 coats is basically black. Sent from my Pixel XL using Tapatalk [/QUOTE]

Verification

Random media

IMAG0583

Interior medium pebble tan.

ELEANOR_S_TRANS_COOLER_NOT_FOR_BIG_HANDED_PEOPLE

Wiring diahgrams

2013-01-01_16-29-19_242

0041

My '04 6Leaker

one_mo

Arizona on our way to Uma

ebay_09_F-250_wht_grille

Latest posts

Gauge cluster face plates
- Latest: crash86
- Yesterday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Yesterday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain

Members online

No members online now.

Total: 298 (members: 0, guests: 298)

Top