Reply to thread

Message: [QUOTE="BigRed97, post: 80094, member: 1979"] so Im converting an 01 CCLB v10 to a PSD, using my e99 ECSB as the donor...both trucks are XLT models with identical options got a few questions on the GEM and body wiring. the CC has an extra 4 wire plug between the body harness and the dash harnes for the rear doors(I believe) that my e99 dash harness does not have. it looks like the wires go right to the GEM. the gem from the v10 truck is a revision "B", I cant remember what my e99 one is, I will check so now for my questions.. 1) is there anything about the GEM that makes it engine specific?(does it care if in a PSD or v10 truck) 2) If [B]yes[/B] to the first question, can I remove the plug and wires from the V10 dash harness, can I overlay it into my e99 harness and repin them into the e99 GEM connectors with the e99 GEM? 3) If [B]no[/B] to the first question, can I use the v10 GEM with the PSD fuse block(I know the fuse blocks are different), and then overlay the 4 wire harness? thanks! [/QUOTE]

Verification

Random media

HFCM Drain Plug Upgrade

IMAG0321

P1020153

2013-06-22_14_07_41

eleanor_part_two_25_

new_badge

baja_rack_3_PIC

!sicpsd

IMG_20120113_140012-1

Wayne_04

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 677 (members: 0, guests: 677)

Top