Reply to thread

Message: [QUOTE="DEECEE, post: 618302, member: 10385"] Well I still haven't been able to get my blinkers working, and I think I created a whole new set of problems trying to troubleshoot the blinkers. I did the steps Dave suggested with the exception of the flasher switch voltage check, I will try and get more of the dash apart so I can check voltage on the connection tomorrow. I thought it would be genius of me to try and jumper across the connector that plugs into the mfs and see if I could get my blinkers to respond, I should have thought this out.... I tested the connectors and thought I had a pretty good idea of which was which, I was wrong. I had actually tested the connections going to the wipers and as I soon found out they don't go straight to the wipers, the go to the g.e.m. first. When I jumpered across it I didn't hear the blinkers, but I smelled a burning plastic smell, which I think was me frying me gem module (which is redundant). I checked all of the fuses and even tested the relays, everything is good, so it looks like I am going to be out several hundred bucks for a new/used gem and still have to blinkers, but on a happy note I adjusted my parking brake, it now works. [/QUOTE]

Verification

Random media

John Deere X728

20110524164817

O&G's 2011 F250 Journey

just another day

eleanor_part_two_60_

2012-01-01_19-48-57_652

Fork_no_gap

4wheeler

rear_axle_4_

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

Stock_Fuel

Latest posts

6R140 surging issue
- Latest: Sterling6.7
- 27 minutes ago
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

No members online now.

Total: 469 (members: 0, guests: 469)

Top