Reply to thread

Message: [QUOTE="MorganY, post: 734548, member: 3115"] Still driving it everyday. Have about 6000 miles on the setup (58xx). Suffering from a massive oil dilution issue, have to change oil every 2000 miles. Assuming its from fuel leaking past the rings, especially on the cylinder where the rod is slightly bent. Checked injector o-rings; the heads were remans from Ford so the fuel rails "should have" been pressure tested. I have the .83 housing on it now. Spools a hair slower than the .70, but the power gained out of it is pretty amazing. Truck will get sideways, which is a good feeling. Finally dialed in ICP with the correct pulley sizes. When you jab the pedal, it has much more torque down low than it ever has. Will be remaking the intermediate pipe, out of 3" stainless. This time, will be using TIG. The only way to weld stainless properly. Hope everyones trucks and ongoing builds continue to go well. :ford: [ATTACH=full]113616[/ATTACH] [ATTACH=full]113617[/ATTACH] Sent from my SAMSUNG-SGH-I337 using Tapatalk 2 [/QUOTE]

Verification

Random media

450R2

2012-05-10_10-43-42_517

lawn mower repair service!

20160526_121117

Picture_1207

ABC5C301-4804-439E-B9D1-5A3E9824944D

Standpipe & Dummy Plug Upgrade

IMG_20110903_182433

.300WM

The problem

DSCF1106

Latest posts

OEM LED sport headlights
- Latest: KBMKVIII
- Today at 12:33 AM
2017+ 6.7 Aluminum Super Duty
Gauge cluster face plates
- Latest: crash86
- Sunday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Sunday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Sunday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ

Members online

No members online now.

Total: 223 (members: 0, guests: 223)

Top