Reply to thread

Message: [QUOTE="Dave_Nevada, post: 1498263, member: 29749"] [b]Pilot Bearing fix 7.3 to solid bronze Oilite[/b] This works quite well. Gets rid of the dreaded needle bearing '"Problem Generator". For you folks who have not used these before, these have been in use for well over 100 years. Powdered metal for bearings is a time tested concept and it worked for many applications until some whizzo decided it would be a good idea to put a hard needle bearing with lube on an input shaft. Problem is, the lube goes away. Now you have a metal lathe at work and it's a matter of time before you're spending thousands on repairs. Before and after pics. [/QUOTE]

Verification

Random media

2011-12-11_16-18-53_375

McIntosh amplifiers

Trucks

4" above stock

MBRP DP

P1060068

Underside_21

DSCF3351

image_12_

Ooops

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 8:29 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 535 (members: 0, guests: 535)

Top